If you formulate flexographic or gravure inks for plastic film, you’ll know how quickly a good print can become a problem once it reaches the converting or packaging line. Film that drags over rollers, sticks to itself on the reel or scuffs in transit puts production speed at risk, and your customers will usually look at the ink they use first.
Slip additives are one of the most practical ways to deal with it. This blog looks at two widely used options, atomised oleamide and atomised erucamide. We’ll cover what each one does, how they differ and how to decide which suits your formulation. By the end of this article, you should know what to look for when you trial them.
What are oleamide and erucamide?
Oleamide and erucamide are both unsaturated primary amides. They work in a similar way. Once they’re in your ink film, they migrate to the surface and form a very thin layer there, which is what gives you ‘slip’. Because the additive works at the surface, you get the effect without changing the ink or the film underneath.
The difference comes down to how quickly they migrate and how the layer behaves afterwards. Oleamide is a fast-migrating additive, so slip develops almost immediately. Erucamide’s migration is more controlled, building slip gradually and forming a stable layer on the surface.
The grades we supply are refined and vegetable-based. Both are available in atomised form, which makes them easy to handle, weigh and disperse when you’re making up your ink, which is useful when you’re working at production scale and want each batch to behave the same way.
Why slip matters in flexographic and gravure printing
Slip is measured as the coefficient of friction (CoF), which tells you how easily one surface slides over another. When you print on film or other plastic surfaces, CoF matters at every stage after the press, from rewinding and slitting to packing and stacking.
The trouble is that ink changes the surface it sits on. The printed area often has a different CoF from the unprinted area, so the film behaves unevenly as it moves through your customer’s machinery. A slip additive in the ink brings the friction over the printed area closer to that of the unprinted film, and that’s the result you’re aiming for.
When the balance is off, you’ll see the same problems turn up on the line:
- Film sticking to itself on the reel or when it’s stacked
- Film dragging over rollers and guides, especially on high-speed machines
- Uneven running that leads to stoppages and waste
- Scratching and rub-off on the finished pack
Each of these can cost your customers time and material. It’s much easier to build slip into the ink at the formulation stage than to explain it after the film has been rejected.
What oleamide does in your inks
Oleamide is the additive to look at when you need slip quickly. It’s a high-purity, fast-migrating additive, so it starts lowering the CoF almost immediately. That’s why it’s widely used on high-speed packaging lines, where printed film moves from the press to converting and onto the pack with very little time in between.
It works in two places at once. It lowers friction between layers of film, which helps when a printed reel is unwound or the film is stacked. It also lowers friction between the film and anything else it touches, such as rollers and guides. If you make ink for polyolefin packaging film, that combination helps the film run smoothly through your customer’s equipment without sticking or dragging.
Because oleamide gives you slip early, the question to ask in your trials is how long you need it to last. If your printed film is stored for a while or handled a lot after printing, it’s worth checking how that slip holds up over that time.
What erucamide does in your inks
Erucamide is more controlled. It gradually migrates to the surface and builds a stable, very thin layer that keeps the friction over your printed area in line with the unprinted film. It’s especially useful on plastic surfaces, where any mismatch between printed and unprinted areas shows up quickly on the production line.
Erucamide doesn’t just add slip. In printing inks for paper and polyolefins, erucamide improves anti-blocking, helps the ink spread, promotes adhesion to the printed surface and protects the ink from scratching and rub-off. If your customer’s packs are handled, stacked or knocked about between the printer and the shelf, that protection is essential to ensure the print arrives looking as it should.
You’ll find erucamide a good fit in flexographic and gravure inks for printed plastics that see plenty of handling and abrasion after printing. If you want slip to develop steadily and stay in place, and you want the ink film to be better protected as well, it’s the natural one to trial first.
Oleamide or erucamide: which should you choose?
| Oleamide | Erucamide | |
|---|---|---|
| Speed of slip | Fast, almost immediate | Gradual and controlled |
| Main strength | Lowering friction between film layers and against rollers | Slip, anti-blocking, adhesion and scratch and rub-off protection |
| Best suited to | High-speed packaging lines | Printed plastics that see handling and abrasion |
| Worth checking in trials | How long the slip lasts | How quickly slip develops on your line |
Your customer’s production line is a good place to start. If the film needs to run smoothly the moment it comes off their press, oleamide is the obvious candidate. If their film has a rougher life after printing, or they need the ink film to resist scratching and rub-off, erucamide is probably a better choice.
Many formulators trial both. Some blend them to get quick slip and longer-lasting protection in the same ink. The right answer depends on your ink system, your substrate and how much slip additive you use, so it’s worth running trials before you settle on a grade.
Your ink chemistry, film type and press conditions can all affect how each additive performs. A supplier who understands your set-up can save you several rounds of testing.
Formulation and handling benefits
The fine, atomised powder disperses readily into your ink. It’s easy to handle and measure out, which helps you keep batches consistent from one run to the next. If you’re moving from a coarser grade, it’s worth running a side-by-side trial to see how it behaves in your process.
Alongside the products, we can support you with the technical and regulatory information you need for your market. You need to know your supply is solid before you need it, not after, so we’ll talk you through availability and pack sizes early in the process.
So, if you work with flexographic or gravure inks and slip is causing problems, or you’re looking at a change of additive, our team is happy to talk it through with you.
It helps if you can tell us about your substrate, your ink type and the line speeds your customers run at, so we can suggest a starting point and get samples out to you.
Get in touch to discuss your requirements or request a sample and try oleamide and erucamide in your formulation.